You determine the size Using 2x4basics Dekmate Deck Bench Brackets, Sand, make a short bench on one side of your deck or use as a railing with integrated seating around the entire perimeter. Just add 2x4's and 2x6's (lumber not included). Assembly is simple and easy using basic tools. You can integrate benches into a deck design with much less measuring, cutting, and fitting than making them from scratch. ACQ treated lumber resistant hardware is included. Dekmate Deck Bench Brackets are space saving. Increase your seating using only 7 inches (18cm) of deck space. Turn space that normally isn't even used into functional outdoor furniture. With our versatile design, Dekmate Deck Bench Brackets can be used for new installations or retrofitted onto existing decks. Installation on docks makes good use of space and provides seating that will not blow away. Dekmate Deck Bench Brackets should be spaced 20 to 24 inches (50cm-60cm) apart and 4 to 12 inches (10cm-30cm) from the end of a bench. The total height of the assembled unit is 36 inches (91cm) from the deck surface. The seat is 17-inches (43cm) high. Sand in color. Alternate colors available include Black and Cedar/Redwood. Sold in single units.Maximize patio space while creating seating or a railing by installing deck bench brackets from 2x4basics. Using only 7 inches of deck space, users affix the brackets to a patio edge to expand their outdoor living space. Spacing the brackets 24 inches apart and adding lumber, ensures these brackets sturdily attach benches
Constructed in a special plastic stronger than steel, the brackets stand up to all degrees of weather while handling standard household regulation weight capacities. The comfortable angle and adaptable design enable users to suit their own needs, whether with a new or old deck or even a boat dock. The brackets work with most types of lumber for greater flexibility. Only basic tools are required for assembly and all hardware is included. For seating, 2x4basics recommends leaving 4 to 12 inches of space from the bracket to the bench end. 2x4basics does not recommend painting the brackets. A ten-year warranty is available for defective parts or craftsmanship for this product. The assembled bracket stands 36 inches high, while the bench seat sits at 17 inches above the deck. Upon shipping, this product measures 18.75 by 22.88 by 2.32 inches, and weighs 6 pounds. --Jessica Reuling
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Sturdier than I thought.
I was a bit apprehensive about buying these brackets and thought that the method of anchoring them to the deck would result in a bench that would flex when I pushed back on it. I was wrong and the bench is much sturdier than I thought it would be.
I did end up putting two more screws in per bracket on the bottom near the front.
Overall these created a good looking, easy to install bench. I highly recommend them. They are cheaper than buying redwood to build your own bench brackets.
Click here to read the full review for more information about this product.
Fast, but a bit flimsy
I had about an 8' straight run to put a bench in, so used four brackets. Is was fairly quick (about 2-2.5 hours, I have a power miter saw), and instructions were clear. Once installed, there was too much "wobble" in the bench - front-to-back, not side-to-side. Luckily, I had posts on the end I could brace it to, so the end result is fine, if you don't have something to brace the ends to, I'd think twice. Lastly, the bench itself is not that comfortable (I find the seat too shallow). Also, the hardware is not the highest quality, and I anticipate it will rust rather quickly (I used stainless steel deck screws to fasten the back and lower front rails). Lastly, pay extra close attention to the washers you use - very similar OD, with a different ID made me redo about 5 screws (my fault, I know). I am and advanced DIYer (I built the 450 sqft three level deck the bench was for).
Great product
This is a fantastic product.
They save you time and the fact that the brackets do not take up hardly any deck space is great.
Highly recommended.
Product Features :
- Build integrated bench seating around your deck using only 7 inches of deck space with Dekmate Deck Bench Brackets and your 2x4's and 2x6's
- Assembly is simple.
- Made of durable, maintenance free structural resin
- Includes 1 deck bench brackets per pack, ACQ treated lumber resistant hardware and assembly instructions (lumber not included)
- 10 year warranty
Rating : 4.1
List Price : $34.16
0 comments:
Post a Comment