Using 2x4basics AnySize Chair or Bench Ends, Sand, and your 2x4's, you can custom build a very sturdy bench, chair or loveseat up to 6 feet (1.8 m). Simple assembly with only a powered screwdriver and a saw. Only straight 90 degree cuts are required - no miters or angles. All hardware is included. Ergonomic design makes the assembled seat surprisingly comfortable. Each 2x4basics AnySize Chair or Bench Ends includes an integrated cup holder. Made of durable and maintenance free structural resin, the all-weather frame is built to last. The assembled unit stands 32 inches (813 mm) to the top of the back with a 17 inch (432 mm) seat height. You choose the length. Sand in color. Combine the AnySize Chair or Bench Ends with the Outdoor Dining Table, AnySize Table, Picnic Table Set or Flip Top BenchTable to create functional and attractive outdoor furniture groupings.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Good idea, good product
I just finished assembling a 2x4basics AnySize Bench 11200 and am very happy with it. The bench assembly took a little longer than I thought it would. I think I worked on it for about two hours. I wasn't counting on having to drill pilot holes for the dozens of screws (included) that had to be used putting the bench together. Nor did I figure on spending so much time figuring out how to best sink the screws into the underside of the boards. Don't worry about slanting the screws into the wood a bit. It is impossible to get a drill into a perfect position for making a 90 degree hole. Most of the screws do not show anyhow.
It was necessary to tip the bench over in order drill pilot holes and to get at the screws. I had to clamp the 2x4's to the plastic/composite ends to keep them from falling off or moving out of position. I would recommend using a couple of small carpentry clamps to hold things in place while putting the bench together.
I had the 2x4's...
Click here to read the full review for more information about this product.
Awesome!
These are the coolest things! We bought 3 sets and made two 12 feet benches, each with one of these in the middle for extra support. We used redwood and they turned out really nice! I love that these come with all the hardware you need. All you have to do is buy the 2x4's and just slide them through and screw them in place! So easy! And you can make them as long as you want. However, if you make the benches long like we did you do need the extra support of more of these. I definately recommend these to anyone!
Beware the Instructions!
Buyer/builder beware!
I am so glad that I carefully studied (and did not trust) the alleged instructions, which were, by the way, no more than a few pictures on the box.
For my four-foot bench, I was "instructed" to cut three four-foot 2 x 4s, and two 41" 2 x 4s. In actuality, the bench requires nine four-foot 2x4s, and no other lengths. Had I followed the instructions, I would have wasted eight feet of expensive treated lumber, AND needed a second trip to the lumberyard to buy additional boards.
My four hours' labor has resulted in a great bench, no thanks to the manufacturer.
Product Features :
- Build your own bench, loveseat or chair any size up to 6 feet using our AnySize Chair or Bench Ends kit and your 2x4's
- Assembly is simple.
- Made of durable, maintenance free structural resin
- Includes 2 bench end supports, hardware and assembly instructions (lumber not included)
- Lifetime warranty
Rating : 4.6
List Price : $48.99
0 comments:
Post a Comment